Yingli Energy connects a 50 megawatt (MW) “Top Runner” project in China to the grid Updated On Sat, Jul 2nd, 2016 by Saurenergy Yingli Energy (China) a wholly owned subsidiary of Yingli Green Energy Holding Company Ltd. has completed a 50 megawatt (MW) “Top Runner” project in Datong City, Shanxi Province, China and connected it to the grid by the end of June 2016. The project is located in the coal-mining subsidence areas in Datong, Shanxi Province, which is the first […] Read more
Meet the Ultra-thin photovoltaics that are flexible enough to wrap around a pencil Updated On Wed, Jun 22nd, 2016 by Saurenergy Researchers in South Korea have developed flexible photovoltaic that could power wearable electronics like fitness trackers, smartwatches and smart glasses in future. The ultra-thin photovoltaics are flexible enough to wrap around the average pencil. The researchers have presented the report results in the journal Applied Physics Letters, from AIP Publishing. “Our photovoltaic is about 1 […] Read more
MNRE sets new capacity addition target of 16,660 MW for green energy Updated On Mon, Jun 6th, 2016 by Saurenergy The Ministry of New and Renewable Energy has set the uppermost capacity addition target of 16,660 MW for the clean power sector this fiscal. The target is close to four times the capacity target that the government set in the previous year. MNRE expects solar segment to achieve its highest-ever annual capacity in the current […] Read more
Heraeus launches two advanced PERC metallization paste series Updated On Thu, May 26th, 2016 by Saurenergy Heraeus Photovoltaics has launched two advanced PERC metallization paste series at the SNEC 2016 in Shanghai. The new products, SOL9631, a low-temperature front-side paste for PERC, and SOL326, a low-activity back-side silver tabbing paste, are offered as part of a PERC package. The pastes enable customers and partners of Heraeus to produce PERC cells with […] Read more
Samsung SDI to start operation of PV paste plant in Wuxi, China in June Updated On Thu, May 26th, 2016 by Saurenergy Samsung SDI has announced that it will start operating a photovoltaic paste production line in June in its Wuxi Plant located in Jiangsu Province, China. Last year in September installation of a polarized film production line and a paste production line parallel started in Samsung SDI’s Wuxi Plant. The paste production line was recently completed, […] Read more
Analog Devices announces ADP509x efficient energy harvesting power management unit Updated On Fri, Apr 15th, 2016 by Saurenergy Analog Devices has announced a power management unit (PMU) designed to enable faster and more efficient energy harvesting in IoT applications where energy is insufficient. The ADP509x with unique circuit design is among the most efficient energy harvesting PMUs in the market said the company in a statement. The new PMU converts harvested power down […] Read more
Panasonic Corporation achieves photovoltaic module conversion efficiency of 23.8% Updated On Thu, Mar 3rd, 2016 by Saurenergy Panasonic Corporation has announced that it has achieved world’s highest photovoltaic module conversion efficiency of 23.8% (aperture area3: 11,562 cm2) at research level. It is a major increase over the previous world record for crystalline silicon-based photovoltaic modules. Earlier record of the conversion efficiency of a crystalline silicon-based photovoltaic module was 22.8%. Back in 2014 […] Read more
$100 Million Manufacturing Units Enters Karnataka Updated On Mon, Dec 14th, 2015 by Saurenergy US based Triton Solar has conferred a venture of $100 million to set up a nanotechnology-powered solar panel assembling in Karnataka. The concurrence was endorsed between Karnataka’s Addl. Chief Secretary (commerce and industries) K Ratna Prabha and Triton Solar Founder / CEO Himanshu B Patel in New York recently. The New Jersey-based Triton Solar produced […] Read more
Instrumentation Engineer (Power) Updated On Mon, May 5th, 2025 by Saurenergy The Burns & McDonnell India (BMI) Power (PWR) Global practice performs engineering and CAD services to support Civil, Electrical, I&C, Mechanical and Structural disciplines for power generation and storage projects. Recent projects are in North America, Canada and include conventional and renewable power generation projects ranging from reciprocating engines, simple cycle combustion turbines, combined cycle […] Read more
