Heraeus Photovoltaics sets milestone with delivery of 4,000th ton of silver pastes Updated On Wed, Apr 19th, 2017 by Saurenergy 4,000 tons of silver pastes technically translates into solar panels able to produce around 133 GW power, which is equal to more than 51 million modules or around 3 billion solar cells. Heraeus Photovoltaics, a leading provider of technology and service solutions for the renewable energy industry, has set a milestone in the industry by […] Read more
JINERGY Announces the Launch of Ultra High-efficiency Heterojunction (HJT) Modules Updated On Wed, Apr 19th, 2017 by Saurenergy JINERGY’s ultra high-efficiency HJT solar cell and module manufacture base in Jinzhong, Shanxi Province will be formally put into production this year Jinneng Clean Energy Technology Ltd. (JINERGY) has announced that its ultra high-efficiency heterojunction (HJT) modules have entered into mass production in the second Jinneng Technology Developer Forum (JDF 2017) hosted by JINERGY during SNEC 2017 […] Read more
VIZ-A-VIZ with HARTEK SINGH, Chairman & Managing Director | Hartek Group Updated On Sat, Apr 15th, 2017 by Saurenergy Q. FM Arun Jaitely in presenting Budget for 2017 announced decrease in customs duty on solar energy panels. What type of impact do you see in the solar industry, will this year witness strong development of solar projects in the country? Does the budget looks sunny for the EPC players? The basic customs duty on […] Read more
Yingli to Power the Largest Bifacial PV Plant in Europe Updated On Fri, Mar 17th, 2017 by Saurenergy The Largest Bifacial PV Plant in Europe project will contain 1,428 Yingli’s PANDA Bifacial modules with a nominal peak power ranging from 275 Watt to 280 Watt each. Yingli Green Energy Holding Company Ltd. announced that Tempress Systems B.V. has begun to construct the Europe’s largest bifacial PV plant with a capacity of close to […] Read more
Scientists are Developing 2-D Layered Hybrid Perovskites for Optoelectronic Performance Updated On Sat, Mar 11th, 2017 by Saurenergy At the edges of the perovskite layers, the new research discovered “layer-edge-states,” which are key to both high efficiency of solar cells (>12 percent) and high fluorescence efficiency (a few tens of percent) for LEDs. Scientists at Los Alamos National Laboratory and their partners are developing innovative 2D layered hybrid perovskites that allow greater freedom […] Read more
Panasonic’s PV Module HIT Adopted for Toyota Motor’s New Prius PHV Updated On Thu, Mar 2nd, 2017 by Saurenergy Panasonic’s newly developed “HIT Photovoltaic Module for Automobile” generates power and charges the drive and 12 V batteries Panasonic Corporation has announced that it has recently developed the “HIT Photovoltaic Module for Automobile”, which was adopted for the new Prius PHV released in February 2017 by Toyota Motor Corporation. In addition, Panasonic’s automotive prismatic lithium-ion […] Read more
Heraeus Photovoltaics Launches Three New Metallization Pastes SOL9641B, 9641Ax/Bx and SOL570 Updated On Thu, Mar 2nd, 2017 by Saurenergy Heraeus SOL9641B enables higher efficiencies gains, the other two metallization pastes 9641Ax/Bx and SOL570 pave the way for emerging solar screen technologies. Heraeus Photovoltaics, has launched three new generation of highly efficient metallization pastes SOL9641B, 9641Ax/Bx and SOL570 at the World Smart Energy Week in Tokyo. Heraeus SOL9641B enables higher efficiencies gains, the other two […] Read more
Jolywood to start production from its 2.1GW N-Type Mono-Si Bifacial Cell Factory soon Updated On Mon, Feb 20th, 2017 by Saurenergy Jolywood started the first-phase construction of N-type mono-Si bifacial cell factory in May 2016 Jolywood recently held an inauguration ceremony in Taizhou, Jiangsu Province for its 2.1GW production site of N-type mono-Si bifacial solar cells. According to a report the production line built at a cost of RMB 1.65 billion will start in September this […] Read more
Reportage on Robotics and Automation with teamtechnik Updated On Mon, Feb 20th, 2017 by Saurenergy Global photovoltaic (PV) manufacturing community is currently witnessing renaissance in investment, development and innovation, a revolution that is said to be largely be driven by technology. It is important for the manufacturing industry to find the most effective as well as cost-effective tools and processes to increase cell and module production and decrease costs within […] Read more
