JinkoSolar modules pass 160 KWh/m2 UV Test in terms of IEC61345 from TUV Rheinland

JinkoSolar

“JinkoSolar is the first Chinese PV manufacturer to pass intensive UV test according to IEC61345, which further demonstrates our technology strength and leading position in the industry”

JinkoSolar Holding Co., Ltd. has announced that its modules have passed intensive UV test in terms of IEC61345 from TUV Rheinland.

Comparing with test procedure of UV Preconditioning test defined in IEC61215, which is the major international standard of the industry, IEC 61345 intend to verify the sample’s UV resistance under different ultraviolet level (“UVA”, 320nm~400nm “UVB”, 280nm~320nm). By considering the test condition of that, Jinko required TUV Rheinland to perform the special UV test which had more than 160KWh/m2 irradiance for exposure (137.84KWh/m2 for front side and 30.07KWh/m2 for rear side). And power degradation was less than 5%.

I’m proud that JinkoSolar is the first Chinese PV manufacturer to pass intensive UV test according to IEC61345, which further demonstrates our technology strength and leading position in the industry,” said Kangping Chen, Chief Executive Officer of JinkoSolar. “We have always been committed to providing our clients with the highest quality and most reliable products while being at the forefront of solar technology.”

"Want to be featured here or have news to share? Write to info[at]saurenergy.com
      SUBSCRIBE NEWS LETTER
Scroll