Electrical Engineer – II (HV Substation)


  • Vadodara, Gujarat
Electrical Engineer – II (HV Substation)
Job Posted : Apr 8th, 2022

Job Description

Essential Skill:-

  • Physical design of Substation including Layouts for Outdoor Switchyard, Gas Insulated Switchgear and calculations for bus work design
  • Protection & Control / Secondary Engineering for Power Networks/ Transmission & Distribution Air Insulated and Gas Insulated Switchgear (upto 400kV Substation) Projects
  • Control and Protection system for preparation of Scheme drawings, Control Wiring Diagrams, interconnection Cable Schedule etc.
  • Unit Protection relay setting calculations
  • Protection coordination for Non-Unit protection using ETAP
  • Experience in Testing and Commissioning of Protection system with numerical Relays


  • Electrical Engineering Degree/ Post Graduation from reputed Institute.
  • Having overall experience of 10 years in the electrical engineering
  • Thorough knowledge of all Power system control, protection & SAS systems
  • Shall have knowledge of Substation Automation & communication protocols
  • Shall understood telecommunication/ teleprotection systems requirements in grids & associated interfaces,
  • Shall be able to develop Protection schemes with relay selection, Function
  • Should have demonstrated knowledge in power system studies, relay setting calculations,
  • Shall be able to offer commissioning support & troubleshooting. Outage schedule preparations, review & analyse SAT Results. Preferably, shall have hands-on testing experience
  • Shall be well versed in advanced MS excel to develop various setting calculations & templates. Preferred to have hands on experience on E Tap, Non unit protection coordination, distance modules etc
  • Must have basic knowledge for industrial power system design and substation design
  • Shall be able to perform Load flow & short circuit studies
  • Must have basic knowledge for industrial plant detailed engineering including lightning, earthing, equipment sizing, etc.
  • Experience in working with international clients with knowledge of national and international standards
  • Is fluent in English (written and spoken) and able to lead negotiations in English and good communication skill. Shall be able to lead coordination with other stake holders such as Primary Design Team, BOP Team, Customer, Owners Engineers & vendors
  • Shall have ability to plan, organize and co-ordinate well, to delegate and supervise accordingly;
  • Effective communication enjoys personal contact.
  •  Shall believe in “customer-oriented delivery
  • Shall be ready and willing to accept changes (Learning capability, openness to innovations, flexibility, self-criticism). shall be willing to work for high pressure EPC jobs, Co-ordinating with site and Manufacturers to resolve technical issues during Commissioning

Specific Accountabilities:-

  • Comply with the Quality and EHS policies from the project, business, unit and corporate within the own area of responsibility;
  • Ensure a coordinate approach in all areas with the other design engineering Activities;
  • Ensure that the design of his Engineering function is according to the applicable rules, regulations codes and standards and according to good engineering practices especially with regard to Environmental aspects and Health & Safety of Site Personal, Operators, Maintenance personnel and third parties,
  • Take-over project from the offer-team, review/comment and reach agreement on the actual project documentation: Scope of supply and Division of Work, Cost-calculation incl. supplier offers for tendering purposes, “Delta list”, showing the differences between a reference power plant and the contacted plant, Technical and commercial contract documentation as appropriate for his work and his team risk review.
  • Independently applies standard design techniques, procedures and criteria acquired through extensive project work experience
  • Holds adequate skills in the operation of design aiding IT tools and provide support and guidance to the subordinate team members
  • Familiar with the Power Industry Products & Equipment.
  • Basic knowledge of the power plant/ industry process
  • Preparation of capacity planning and subsequent staffing according to the project requirements.
  • Coordinate with the Project Engineering Manager and other projects LE the information workflow and mitigate in case of problems.
  • Ensure fulfilment of design, quality, constructability and functionality of this scope of supply and services at the best cost according to the project and contractual requirements.
  • Ensure by pro-active follow-up “on-time” delivery
  • Identify, plan and conduct Design Reviews and the Design Freeze and ensure that corrective actions defined by the Design Reviews are closed on time.
  • Ensure experience feedback from the project to the Lesson Learnt System.
  • Compile the project documentation and organize a proper archiving of all project’s relevant documents with the applicable tools.
  • Candidates shall be willing to work for high pressure EPC jobs, Co-ordinating with site and Manufacturers to resolve technical issues during Commissioning


  • ME/ M. Tech or BE/ B. Tech, in Electrical/ Power System
  • Minimum 6-8 years of experience Transmission & Distribution


  • Vadodara, Gujarat.

Company Overview:-

We’re not just engineers. We’re a global team of data scientists, consultants, construction workers and innovators all working to create a better tomorrow. Every day, we help customers in energy, chemicals and resources get one step closer to solving our planet’s toughest issues. Climate change. The energy transition. Digital transformation. And how we can deliver a more sustainable world.